Directory

Iwona M. Jasiuk's directory photo.

Iwona M. Jasiuk

Professor

Primary Affiliation

Computational Imaging

Affiliations

Status Affiliate Faculty

Home Department of Mechanical Science and Engineering

Phone 333-9259

Email ijasiuk@illinois.edu

Address

  • Biography

    Iwona Jasiuk received her Ph.D. (Theoretical and Applied Mechanics) in 1986 from Northwestern University. She is a professor in the Department of Mechanical Science and Engineering and a part-time faculty member at the Beckman Institute's 3D Micro and Nanosystems group. Her interests are in the mechanics of materials, more specifically in modeling and characterization of composite materials with a focus on biological materials and nanocomposite materials. Prior to joining UIUC in 2006, she was on faculty at Michigan State University, Georgia Institute of Technology and Concordia University.

  • Honors

    American Society of Mechanical Engineering (ASME) Fellow (2003); Member of editorial boards: International Journal of Damage Mechanics (2006 – present); Journal of Mechanics of Materials and Structures (2005 - present);  International Journal of Multiscale Computational Engineering (2004 - present); International Journal of Solids and Structures (1997 - 2005); Member of Board of Directors - Society of Engineering Science (SES) (2000-2006), Vice-President (2005), President (2006); SES representative to the US National Congress/Theoretical and Applied Mechanics (2007-2010); National Center for Supercomputing Applications (NCSA) (2014); Associate, Center for Advanced Studies, UIUC, (2017-2018); American Advanced Materials Award, International Association of Advanced Materials, (2016); Health Innovation Professor, The Carle Illinois College of Medicine, (2021 - present).

  • Research

    Professor Jasiuk studies engineering and biological materials. She investigates materials theoretically and experimentally and designs new advanced materials based on bioinspiration for various medical and technological applications. The engineering materials of interest include composites and nanocomposites, polymers, and alloys for aerospace, automotive, and energy applications. The biological materials studies address the mechanics of bone and hoof. She is also designing new bioinspired materials and 3D printing them using various additive manufacturing techniques.

    One ongoing project on bone aims to explain the mechanics of bone at different structural scales to obtain predictive tools for healthy and diseased bone. She is also exploring computational and non-invasive experimental tools for use in clinical settings to diagnose bone health.

    The project on natural materials investigates a hoof wall and hoof-inspired materials. Professor Jasiuk is studying, jointly with Professor Marc Meyers from the University of California at San Diego, the structure, composition, and mechanical properties of the hoof wall at different structural levels. They are also designing hoof-inspired impact-resistant materials for various engineering applications.

    She also designs, manufactures, characterizes, and models novel architectured cellular bioinspired multifunctional materials. She employs different additive manufacturing techniques to create models for testing and investigates their mechanical, electrical, thermal, acoustic, and electromagnetic properties.

    Finally, Professor Jasiuk is a site director of the NSF I/UCRC Center on Novel High Voltage/Temperature Materials and Structures. She designs and explores novel high-temperature composite and nanocomposite materials for aerospace applications and high-conductivity alloys for power transmission.

  • 2021

    • Pang, S, Schwarcz, HP & Jasiuk, I 2021, 'Interfacial bonding between mineral platelets in bone and its effect on mechanical properties of bone', Journal of the Mechanical Behavior of Biomedical Materials, vol. 113, 104132. DOI: 10.1016/j.jmbbm.2020.104132
    • Sabet, FA, Koric, S, Idkaidek, A & Jasiuk, I 2020, 'High-Performance Computing Comparison of Implicit and Explicit Nonlinear Finite Element Simulations of Trabecular Bone', Computer Methods and Programs in Biomedicine, pp. 105870. DOI: 10.1016/j.cmpb.2020.105870

    2020

    • Abueidda, DW, Elhebeary, M, Shiang, CSA, Abu Al-Rub, RK & Jasiuk, IM 2020, 'Compression and buckling of microarchitectured Neovius-lattice', Extreme Mechanics Letters, vol. 37, 100688. DOI: 10.1016/j.eml.2020.100688
    • Abueidda, DW, Kang, Z, Koric, S, James, KA & Jasiuk, IM 2020, 'Topology optimization for three-dimensional elastoplastic architected materials using a path-dependent adjoint method', International Journal for Numerical Methods in Engineering. DOI: 10.1002/nme.6604
    • Bakir, M, Meyer, JL, Pang, S, Economy, J & Jasiuk, I 2020, 'Merging versatile polymer chemistry with multifunctional nanoparticles: An overview of crosslinkable aromatic polyester matrix nanocomposites', Soft Matter, vol. 16, no. 6, pp. 1389-1403. DOI: 10.1039/c9sm02129a

    2019

    • Abueidda, DW, Elhebeary, M, Shiang, CSA, Pang, S, Abu Al-Rub, RK & Jasiuk, IM 2019, 'Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study', Materials and Design, vol. 165, 107597. DOI: 10.1016/j.matdes.2019.107597
    • Hussainova, I, Ivanov, R, Sudhir Kale, S & Jasiuk, I 2019, Tunneling—Percolation behavior of graphene-encapsulated whiskers as electroconductive fillers for ceramics. in Advanced Structured Materials. Advanced Structured Materials, vol. 95, Springer-Verlag Berlin Heidelberg, pp. 131-139. DOI: 10.1007/978-3-030-00868-0_9
    • Idkaidek, A & Jasiuk, I 2019, 'Modeling of Osteoprobe indentation on bone', Journal of the Mechanical Behavior of Biomedical Materials, vol. 90, pp. 365-373. DOI: 10.1016/j.jmbbm.2018.09.037

    2018

    • Bakir, M, Elhebeary, M, Meyer, JL, Sutrisno, A, Economy, J & Jasiuk, I 2018, 'Interfacial liquid crystalline mesophase domain on carbon nanofillers in aromatic thermosetting copolyester matrix', Journal of Applied Polymer Science, vol. 135, no. 32, 46584. DOI: 10.1002/app.46584
    • Bakir, M, Henderson, CN, Meyer, JL, Oh, J, Miljkovic, N, Kumosa, M, Economy, J & Jasiuk, I 2018, 'Effects of environmental aging on physical properties of aromatic thermosetting copolyester matrix neat and nanocomposite foams', Polymer Degradation and Stability, vol. 147, pp. 49-56. DOI: 10.1016/j.polymdegradstab.2017.11.009
    • Bakir, M, Meyer, JL, Sutrisno, A, Economy, J & Jasiuk, I 2018, 'Aromatic thermosetting copolyester bionanocomposites as reconfigurable bone substitute materials: Interfacial interactions between reinforcement particles and polymer network', Scientific reports, vol. 8, no. 1, 14869. DOI: 10.1038/s41598-018-33131-5
    • Bakir, M, Meyer, JL, Sutrisno, A, Economy, J & Jasiuk, I 2018, 'Glass transition broadening via nanofiller-contiguous polymer network in aromatic thermosetting copolyester nanocomposites', Journal of Polymer Science, Part B: Polymer Physics, vol. 56, no. 24, pp. 1595-1603. DOI: 10.1002/polb.24747
    • Bakir, M, Meyer, JL, Sutrisno, A, Economy, J & Jasiuk, I 2018, 'Nanofiller-conjugated percolating conductive network modified polymerization reaction characteristics of aromatic thermosetting copolyester resin†', RSC Advances, vol. 8, no. 9, pp. 4946-4954. DOI: 10.1039/c7ra12506b
    • Idkaidek, A, Koric, S & Jasiuk, I 2018, 'Fracture analysis of multi-osteon cortical bone using XFEM', Computational Mechanics, vol. 62, no. 2, pp. 171-184. DOI: 10.1007/s00466-017-1491-3
    • Jasiuk, I, Abueidda, DW, Kozuch, C, Pang, S, Su, FY & McKittrick, J 2018, 'An Overview on Additive Manufacturing of Polymers', JOM, vol. 70, no. 3, pp. 275-283. DOI: 10.1007/s11837-017-2730-y
    • Kozuch, CD & Jasiuk, IM 2018, 'Optimization of structures made from composites with elliptical inclusions', Journal of Applied Mechanics, Transactions ASME, vol. 85, no. 12, 121006. DOI: 10.1115/1.4041225
    • Sabet, FA, Jin, O, Koric, S & Jasiuk, I 2018, 'Nonlinear micro-CT based FE modeling of trabecular bone—Sensitivity of apparent response to tissue constitutive law and bone volume fraction', International Journal for Numerical Methods in Biomedical Engineering, vol. 34, no. 4, e2941. DOI: doi.org/10.1002/cnm.2941
    • Sabet, FA, Su, FY, McKittrick, J & Jasiuk, I 2018, 'Mechanical Properties of Model Two-Phase Composites with Continuous Compared to Discontinuous Phases', Advanced Engineering Materials, vol. 20, no. 10, 1800505. https://doi.org/10.1002/adem.201800505 Sabet, FA, Su, FY, McKittrick, J & Jasiuk, I 2018, 'Mechanical Properties of Model Two-Phase Composites with Continuous Compared to Discontinuous Phases', Advanced Engineering Materials, vol. 20, no. 10, 1800505. DOI: 10.1002/adem.201800505

    2017

    • A. Idkaidek and I. Jasiuk (2017), “Cortical Bone Fracture Analysis Using XFEM – Case Study,” International Journal for Numerical Methods in Biomedical Engineering, e02809.
    • Abueidda, D. W.; Bakir, M.; Abu Al-Rub, R. K.; Bergstrom, J. S.; Sobh, N. A.; Jasiuk, I., Mechanical Properties of 3D Printed Polymeric Cellular Materials with Triply Periodic Minimal Surface Architectures. Materials and Design 2017, 122, 255-267.
    • D. Dragomir-Daescu, A. Rezaei, S. Uthamaraj, T. Rossman, J. T. Bronk, M. Bolander, V. Lambert, S. McEligot, R. Entwistle, H. Giambini, I. Jasiuk, M. J. Yaszemski, L. Lu (2017), “Proximal Cadaveric Femur Preparation for Fracture Strength Testing and Quantitative CT-Based Finite Element Analysis,” Journal of Visualized Experiments (JoVE) 121, ISSN: 1940-087X.
    • D. W. Abueidda, F. A. Sabet, I. Jasiuk (2017), “Modeling of Elasticity and Strength of Bone at Nanoscale,” Journal of Biomechanical Engineering 139(5), 051006-1-10.
    • H. Schwarcz, D. W. Abueidda, I. Jasiuk (2017), "The Ultrastructure of Bone and its Relevance to Mechanical Properties," Frontiers in Physics: Biomedical Physics, in press.
    • Idkaidek, A., Agarwal, V., Jasiuk, I., Finite element simulation of Reference Point Indentation on bone. Journal of the Mechanical Behavior of Biomedical Materials 2017, 65, 574-583.
    • M. Bakir, E. Bahceci, J.L.Meyer, J. Economy, I. Jasiuk (2017), “Aromatic Thermosetting Copolyester Foam Core and Aluminum Foam Face Three-Layer Sandwich Composite for Impact Energy Absorption,” Materials Letters 196, 288-291.
    • M. Bakir, I. Jasiuk (2017), “Novel Metal-Carbon Nanomaterials: A Review on Covetics,” Advanced Materials Letters 8(9), 884-890.
    • M. Bakir, J. L. Meyer, J. Economy, I. Jasiuk (2017), “Aromatic Thermosetting Copolyester Nanocomposite Foams: High Thermal and Mechanical Performance Lightweight Structural Materials,” Polymer 123, 311-320.
    • M. Taleb, I. Hussainova, R. Ivanov, I. Jasiuk (2017), “Graphenated Ceramic Nanofibers for Highly Sensitive Simultaneous Detection of Dopamine, Uric Acid and Ascorbic Acid,” Advanced Materials Letters, in press.
    • M. Valdez, C. Kozuch, E.J. Faierson, I. Jasiuk (2017), “Induced Porosity in Super Alloy 718 through the Laser Additive Manufacturing Process: Microstructure and Mechanical Properties,” Journal of Alloys and Compounds 725, 757-764.

    2016

    • Abueidda, D. W.; Abu Al-Rub, R. K.; Dalaq, A. S.; Lee, D. W.; Khan, K. A.; Jasiuk, I., Effective Conductivities and Elastic Moduli of Novel Foams with Triply Periodic Minimal Surfaces. Mechanics of Materials 2016, 95, 102-115.
    • Barabash, R. I.; Agarwal, V.; Koric, S.; Jasiuk, I.; Tischler, J. Z., Finite Element Simulation and X-Ray Microdiffraction Study of Strain Partitioning in a Layered Nanocomposite. Journal of Applied Crystallography 2016, 4351347 (11 pages).
    • Baro, J.; Shyu, P.; Pang, S. Y.; Jasiuk, I. M.; Vives, E.; Salje, E. K. H.; Planes, A., Avalanche Criticality During Compression of Porcine Cortical Bone of Different Ages. Physical Review E 2016, 93, (5).
    • D.T. O’Connor, K.I. Elkhodary, Y. Fouad, M.S. Greene, F.A. Sabet, J. Qian, Y. Zhang, W.K. Liu, I. Jasiuk (2016), “Modeling Orthotropic Elasticity, Localized Plasticity and Fracture in Trabecular Bone,” Computational Mechanics 58 (3), 423-439.
    • Dalaq, A. S.; Abueidda, D. W.; Abu Al-Rub, R. K.; Jasiuk, I. M., Finite Element Prediction of Effective Elastic Properties of Interpenetrating Phase Composites with Architectured 3D Sheet Reinforcements. International Journal of Solids and Structures 2016, 83, 169-182.
    • Iftekhar Jaim, H. M.; Isaacs, R. A.; Rashkeev, S. N.; Cole, D. P.; LeMieux, M.; Jasiuk, I.; Nilufar, S.; Salamanca-Riba, L. G., Sp2 Carbon in Al- 6061 and Al-7075 Alloys in the Form of Crystalline Graphene Nanoribbons. Carbon 2016, 107, 56-66.
    • Karimi, P., Ostoja-Starzewski, M. and Jasiuk, I., Experimental and computational study of shielding effectiveness of polycarbonate carbon nanocomposites. Journal of Applied Physics, 2016, 120, 145103-1-111.
    • Sabet, F. A.; Najafi, A. R.; Hamed, E.; Jasiuk, I., Modelling of Bone Fracture and Strength at Different Length Scales: A Review. Interface Focus 2016, 6, (1).

    2015

    • Abueidda, D. W.; Dalaq, A. S.; Abu Al-Rub, R. K.; Jasiuk, I., Micromechanical Finite Element Predictions of a Reduced Coefficient of Thermal Expansion for 3D Periodic Architectured Interpenetrating Phase Composites. Composite Structures 2015, 133, 85-97.
    • Chittenden, M.; Najafi, A. R.; Li, J.; Jasiuk, I., Nanoindentation and Ash Content Study of Age Dependent Changes in Porcine Cortical Bone. Journal of Mechanics in Medicine and Biology 2015, 15, (5).
    • Idkaidek, A.; Jasiuk, I., Towards a High Speed 3D Nonlinear Soft Tissue Deformation Simulation using Abaqus Software. Journal of Robotic Surgery 2015, 9, 299-310.
    • Kale, S.; Sabet, F. A.; Jasiuk, I.; Ostoja-Starzewski, M., Tunneling-Percolation Behavior of Polydisperse Prolate and Oblate Ellipsoids. Journal of Applied Physics 2015, 118, (15).

    2014

    • Lee, W.; Jasiuk, I., Effects of Freeze-Thaw and Micro-Computed Tomography Irradiation on Structure-Property Relations of Porcine Trabecular Bone. Journal of Biomechanics 2014, 47, (6), 1495-1498, DOI: 10.1016/j.jbiomech.2014.02.022.
    • Setters, A.; Jasiuk, I., Towards a Standardized Reference Point Indentation Testing Procedure. Journal of the Mechanical Behavior of Biomedical Materials 2014, 34, 57-65, DOI: 10.1016/j.jmbbm.2014.01.012.

    2013

    • Cameron, A. J.; Milner, D. J.; Lee, J. S.; Cheng, J.; Fang, N. X.; Jasiuk, I. M., Employing the Biology of Successful Fracture Repair to Heal Critical Size Bone Defects. Current Topics in Microbiology and Immunology 2013, 367, 113-132.
    • Hamed, E.; Jasiuk, I., Multiscale Damage and Strength of Lamellar Bone Modeled by Cohesive Finite Elements. Journal of the Mechanical Behavior of Biomedical Materials 2013, 28, 94-110, DOI: 10.1016/j.jmbbm.2013.05.025.
    • Jast, J.; Jasiuk, I., Age-Related Changes in the 3D Hierarchical Structure of Rat Tibia Cortical Bone Characterized by High-Resolution Micro-CT. Journal of Applied Physiology 2013, 114, (7), 923-933.
    • Lee, Y.; Jasiuk, I., Apparent Elastic Properties of Random Fiber Networks. Computational Materials Science 2013, 79, 715-723, DOI: 10.1016/j.commatsci.2013.07.037.
    • Middleton, J.; Burks, B.; Wells, T.; Setters, A. M.; Jasiuk, I.; Kumosa, M., The Effect of Ozone and High Temperature on Polymer Degradation in Polymer Core Composite Conductors. Polymer Degradation and Stability 2013, 98, (11), 2282-2290, DOI: 10.1016/j.polymdegradstab.2013.08.013.
    • Rasoulian, R.; Najafi, A. R.; Chittenden, M.; Jasiuk, I., Reference Point Indentation Study of Age-Related Changes in Porcine Femoral Cortical Bone. Journal of Biomechanics 2013, 46, (10), 1689-1696, DOI: 10.1016/j.jbiomech.2013.04.003.
    • Schreader, K. J.; Bayer, I. S.; Milner, D. J.; Loth, E.; Jasiuk, I., A Polyurethane-Based Nanocomposite Biocompatible Bone Adhesive. Journal of Applied Polymer Science 2013, 127, (6), 4974-4982

    2012

    • Ambekar, R.; Chittenden, M.; Jasiuk, I.; Toussaint, K. C., Quantitative Second-Harmonic Generation Microscopy for Imaging Porcine Cortical Bone: Comparison to SEM and Its Potential to Investigate Age-Related Changes. Bone 2012, 50, (3), 643-650.
    • Chittenden, M.; Feng, J.; Schrider, J.; Dickinson, M.; Jasiuk, I., Mechanical Properties of Porcine Femoral Cortical Bone Measured by Nanoindentation. Journal of Biomechanics 2012, 45, (10), 1775-1782.
    • Feng, L.; Chittenden, M.; Schirer, J.; Dickinson, M.; Jasiuk, I., Mechanical Properties of Porcine Femoral Cortical Bone Measured by Nanoindentation. Journal of Biomechanics 2012, 45, (10), 1775-1782.
    • Hamed, E.; Jasiuk, I., Elastic Modeling of Bone at Nanostructural Level. Materials Science and Engineering R 2012, 73, (3-4), 27-49.
    • Hamed, E.; Jasiuk, I.; Yoo, A.; Lee, Y.; Liszka, T., Multi-Scale Modelling of Elastic Moduli of Trabecular Bone. Journal of the Royal Society Interface 2012, 9, (72), 1654-1673.
    • Hamed, E.; Novitskaya, E.; Li, J.; Chen, P. Y.; Jasiuk, I.; McKittrick, J., Elastic Moduli of Untreated, Demineralized and Deproteinized Cortical Bone: Validation of a Theoretical Model of Bone as an Interpenetrating Composite Material. Acta Biomaterialia 2012, 8, (3), 1080-1092.
    • Kumar, N. C.; Dantzig, J. A.; Jasiuk, I. M., Modeling of Cortical Bone Adaptation in a Rat Ulna: Effect of Frequency. Bone 2012, 50, (3), 792-797.
    • Youkhanna, D.; Griffon, D. J.; Fredericks, P.; Schaeffer, D.; Fan, T. M.; Jasiuk, I. M., Bone Resorption Markers and Dual-Energy X-Ray Absorptiometry in Dogs with Avascular Necrosis, Degenerative Joint Disease, and Trauma of the Coxofemoral Joint. Veterinary Surgery 2012, 41, (5), 551-558.

    2011

    • Feng, L., & Jasiuk, I. (2011). Multi-scale characterization of swine femoral cortical bone. Journal of Biomechanics, 44(2), 313-320. https://doi.org/10.1016/j.jbiomech.2010.10.011
    • Feng, L., Milner, D. J., Xia, C., Nye, H. L. D., Redwood, P., Cameron, J. A., Stocum, D. L., Fang, N., & Jasiuk, I. (2011). Xenopus laevis as a novel model to study long bone critical-size defect repair by growth factor-mediated regeneration. Tissue Engineering - Part A, 17(5-6), 691-701. DOI: 10.1089/ten.tea.2010.0123
    • Feng, L.; Milner, D. J.; Xia, C.; Nye, H. L. D.; Redwood, P.; Cameron, J. A.; Stocum, D. L.; Fang, N.; Jasiuk, I., Long Bone Critical Size Defect Repair by Regeneration in Adult Xenopus Laevis Hind Limbs. Tissue Engineering Part A 2011, 17, (5-6), 691-701.
    • Hussainova, I.; Antonov, M.; Jasiuk, I.; Du, X. D., Characterisation of microstructure and mechanical properties of cermets at micro- and nanoscales. International Journal of Materials & Product Technology 2011, 40, (1-2), 58-74.
    • Hussainova, I.; Antonov, M.; Jasiuk, I.; Du, X. D., Characterisation of Microstructure and Mechanical Properties of Cermets at Micro- and Nanoscales. International Journal of Materials & Product Technology 2011, 40, (1-2), 58-74.
    • Hussainova, I.; Hamed, E.; Jasiuk, I., Nanoindentation Testing and Modeling of Chromium-Carbide-Based Composites. Mechanics of Composite Materials 2011, 46, (6), 667-678.
    • Novitskaya, E. E.; Chen, H.-P.; Hamed, E.; Li, J.; Lubarda, V.; Jasiuk, I.; McKittrick, J., Recent Advances on the Measurement and Calculation of the Elastic Moduli of Cortical and Trabecular Bone: A Review. Theoretical and Applied Mechanics Journal 2011, 38, (3), 209-303.

    2010

    • Chennimalai Kumar, N., Dantzig, J. A., Jasiuk, I. M., Robling, A. G., & Turner, C. H. (2010). Numerical modeling of long bone adaptation due to mechanical loading: Correlation with experiments. Annals of Biomedical Engineering, 38(3), 594-604. DOI: 10.1007/s10439-009-9861-4
    • Feng, L., & Jasiuk, I. (2010). Effect of specimen geometry on tensile strength of cortical bone. Journal of Biomedical Materials Research - Part A, 95 A(2), 580-587. DOI: 10.1002/jbm.a.32837
    • Hamed, E.; Lee, Y.; Jasiuk, I., Multiscale modeling of elastic properties of cortical bone. Acta Mechanica 2010, 213, (1-2), 131-154.

    2009

    • Hussainova, I.; Jasiuk, I.; Sardela, M.; Antonov, M., Micro-Mechanical Properties and Erosive Wear Performance of Chromium Carbide Based Cermets. Wear 2009, 267, 152-159.
    • Jasiuk, I., Stress invariance and exact relations in the mechanics of composite materials: Extensions of the CLM result - A review. Mechanics of Materials 2009, 41, (4), 394-404.
    • Wang, C., Feng, L., & Jasiuk, I. (2009). Scale and boundary conditions effects on the apparent elastic moduli of trabecular bone modeled as a periodic cellular solid. Journal of Biomechanical Engineering, 131(12), [121008-1]. DOI: 10.1115/1.4000192

    2008

    • Jordon, J.; Jasiuk, I.; Zubelewicz, A., Concentrated Force Acting on Power Law Creep Half-Plane. Journal of Mechanics of Materials and Structures 2008, 3, 697-705.

    2006

    • Tannenbaum, R.; Zubris, M.; David, K.; Cipriani, D.; Jacob, K.; Jasiuk, I.; Dan, N., FTIR Characterization of the Reactive Interface of Cobalt Oxide Nanoparticles Embedded in Polymeric Matrices. Journal of Physical Chemistry B 2006, 110, 2227-2232.
    • Yoo A, Jasiuk I. Couple-stress moduli of a trabecular bone idealized as a 3D periodic cellular network. J Biomech. 2006;39(12):2241-52. DOI: 10.1016/j.jbiomech.2005.07.006.

    2005

    • Jordan, J.; Jacob, K.; Tannenbaum, R.; Sharaf, M.; Jasiuk, I., Experimental Trends in Polymer-Matrix Nanocomposites - A Review. Materials Science & Engineering A 2005, 393, 1-11.
    • Rubin MA, Jasiuk I. The TEM characterization of the lamellar structure of osteoporotic human trabecular bone. Micron. 2005;36(7-8):653-64. DOI: 10.1016/j.micron.2005.07.010.

    2004

    • Jasiuk, I.; Ostoja-Starzewski, M., Modeling of Bone at a Single Lamella Level. Biomechanics and Modeling in Mechanobiology 2004, 3, 67-74.
    • Rubin, M. A.; Rubin, J.; Jasiuk, I., SEM and TEM Study of the Hierarchical Structure of C3H/HeJ and C57BL/6J Mice Trabecular Bone. Bone 2004, 35, 11-20.
    • Taylor, J.; Jasiuk, I., Technical Note on the Preparation of Un-decalcified Trabecular Bone for examination by TEM. Microscopy Today (Microscopy 101) 2004, May issue, 44.

    2003

    • Jasiuk, I.; Ostoja-Starzewski, M., On the Reduction of Constants in Planar Cosserat Elasticity with Eigenstrains and Eigencurvatures. Journal of Thermal Stresses 2003, 26, 1221-1228.
    • Rubin, M. A.; Jasiuk, I.; Taylor, J.; Rubin, J.; Ganey, T.; Apkarian, R., TEM Analysis of the Nanostructure of Normal and Osteoporotic Human Bone. Bone 2003, 33, 270-282.
    • Baxter, W.J.; Al-Ostaz, A.; Jasiuk, I., Fatigue of Kaowool Reinforced Aluminum: Effect of Shot Particle Wall Thickness. Journal of Materials Science 2003, 38, 2851-2860.
    • Park, Ji Eun; Jasiuk, I.; Zubelewicz, A., Interfacial Stress Analysis and Fracture in Electronic Packaging Assemblies with Heterogeneous Underfill. ASME Journal of Electronic Packaging 2003, 125, 400-413.
    • Park, Ji Eun; Jasiuk, I.; Zubelewicz, A., Micromechanics-Based Interfacial Stress Analysis and Fracture in Electronic Packaging Assemblies. ASME Journal of Electronic Packaging 2003, 125, 44-52.

    2002

    • Bouyge, F.; Jasiuk, I.; Boccara, S.; Ostoja-Starzewski, M., A Micromechanically Based Couple-Stress Model of an Elastic Orthotropic Two-phase Composite. European Journal of Mechanics/A: Solids 2002, 21(3), 465-481.
    • Jiang, M.; Jasiuk, I.; Ostoja-Starzewski, M., Apparent Elastic and Elastoplastic Behavior of Periodic Composites. International Journal of Solids and Structures 2002, 39, 199-212.
    • Jiang, M.; Jasiuk, I.; Ostoja-Starzewski, M., Apparent Thermal Conductivity of Periodic Two-dimensional Composites. Computational Materials Science 2002, 25 (3), 329-338.
    • Jasiuk, I.; Boccara, S., On the Reduction of Constants in Plane Elasticity with Eigenstrains. Archives of Mechanics 2002, 54, 5-16.